FANDOM


File:BenFranklinDuplessis.jpg

In the history of mankind, we can not deny the fact that the most powerful nation on Earth is the one and only United States of America, the country itself had emerged to become the sole superpower since the dissolution of the Soviet Union in 1991. In the next two decades to come, we would have seen that the US Government imposes all the authority to become the leading power and the largest army in the entire world. We have seen all of it in the various conflicts around the world. It led all of us to think about if the US never existed. We are not going in that direction, however, we are going in the direction that we could find their existence under the British Crown like Canada or Australia in our timeline. The Albany Plan timeline will go through the details about the plan that made by Pennsylvanian legislator with the same name as the Albany Congress in Albany, New York on July 10th 1954. Yes, we are talking about one and only Benjamin Franklin. Shall we see the timeline where the British Empire replaced the Americans as the most powerful empire on Earth with the American Commonwealth as the leading dominion in the British Empire? It shall be seen here. Ladies and Gentlemen, May I present to you the alternate history of The Albany Plan.

History Edit

The Albany Plan & The Galloway Plan Edit

File:1428.gif

The Albany Plan was originally brought into Albany Congress on July 10th, 1754 by the Pennsylvanian legislator named Benjamin Franklin, the purposes of the plan was meant to unify the 13 American Colonies into one union to gain a stronger ground and to deter the incoming threats of the French and the Indians in the local area. There was also the plan called The Galloway Plan which resembled much of the original Franklin's plan. However, both of those plans were rejected by the Albany Congress and later in First Continental Congress in 1774. Both plans of Benjamin Franklin and Joseph Galloway including the call for the a federal government led by the President-General, who appointed and supported by the King himself. There was also the Federal Council, in which to elect the representatives from each colonies to help governing the union. They resolved and agreed to put the plan forward, however, when the plan reached to the states' legislatures. They eventually reject the proposal. As much as the First Continental Congress rejected Galloway's proposal for the Union under British Crown.

Point of Divergence Edit

After the day that Albany Congress of 7 Colonies had decided to sent the plan forward to the other British Colonies of America. All of 7 Colonies accepted the idea as their have resolved between themselves that Unity is better through Diversity. After the 7 North Colonies resolved to have the plan further introduced to the Southern colonies. In January 1755, the Northern colonies sent delegates to the southern American colonies to unite as a one single union under the British Crown, the

File:Benjamin Franklin in England.jpg

Southerners, know as the main Loyalist hub of all the American colonies approved what the North offered. In 27th March, 1755. The delegates from 13 British American colonies was sent to London to convene with the Parliament and the King to approve that they would be under the British Crown if they were to permit self-governing status. The King was opposed to the plan explained by the delegates at first, however, Benjamin Franklin, the head of the delegate convinced the lords in Privy Council to grant them the status, stated that "If you want to hold on to your power, so be it. The consequence of this decision will make you regret for many years to come!" once Franklin stated in that way, the Privy Council were all afraid to lose one of their first major colonies in the America. So, they promised to counsel the King and the Parliament to change their mind, which they did. The Self-Governing Dominion status was given to the American Colonies on July 4th, 1756. (2 decades before OTL Declaration of Independence) The Constitution of the Union was ratified by 13 colonies and became the 'American Commonwealth'

-- -- This module will implement Template loop detected: Template:Navbox --

local p = {}

local HtmlBuilder = require('Module:HtmlBuilder') local navbar = require('Module:Navbar')._navbar local getArgs -- lazily initialized

local args local tableRowAdded = false local border local listnums = {}

local function trim(s)

   return (mw.ustring.gsub(s, "^%s*(.-)%s*$", "%1"))

end

local function addNewline(s)

   if s:match('^[*:;#]') or s:match('^{|') then
       return '\n' .. s ..'\n'
   else
       return s
   end

end

local function addTableRow(tbl)

   -- If any other rows have already been added, then we add a 2px gutter row.
   if tableRowAdded then
       tbl
           .tag('tr')
               .css('height', '2px')
               .tag('td')
               	.attr('colspan',2)
   end

   tableRowAdded = true

   return tbl.tag('tr')

end

local function renderNavBar(titleCell)

   -- Depending on the presence of the navbar and/or show/hide link, we may need to add a spacer div on the left
   -- or right to keep the title centered.
   local spacerSide = nil

   if args.navbar == 'off' then
       -- No navbar, and client wants no spacer, i.e. wants the title to be shifted to the left. If there's
       -- also no show/hide link, then we need a spacer on the right to achieve the left shift.
       if args.state == 'plain' then spacerSide = 'right' end
   elseif args.navbar == 'plain' or (not args.name and mw.getCurrentFrame():getParent():getTitle() == 'Template:Navbox' and (border == 'subgroup' or border == 'child' or border == 'none')) then
       -- No navbar. Need a spacer on the left to balance out the width of the show/hide link.
       if args.state ~= 'plain' then spacerSide = 'left' end
   else
       -- Will render navbar (or error message). If there's no show/hide link, need a spacer on the right
       -- to balance out the width of the navbar.
       if args.state == 'plain' then spacerSide = 'right' end

       titleCell.wikitext(navbar{ 
           args.name, 
           mini = 1, 
           fontstyle = (args.basestyle or ) .. ';' .. (args.titlestyle or ) ..  ';background:none transparent;border:none;'
       })
   end

   -- Render the spacer div.
   if spacerSide then
       titleCell
           .tag('span')
               .css('float', spacerSide)
               .css('width', '6em')
               .wikitext(' ')
   end

end

-- -- Title row -- local function renderTitleRow(tbl)

   if not args.title then return end

   local titleRow = addTableRow(tbl)

   if args.titlegroup then
       titleRow
           .tag('th')
               .attr('scope', 'row')
               .addClass('navbox-group')
               .addClass(args.titlegroupclass)
               .cssText(args.basestyle)
               .cssText(args.groupstyle)
               .cssText(args.titlegroupstyle)
               .wikitext(args.titlegroup)
   end

   local titleCell = titleRow.tag('th').attr('scope', 'col')

   if args.titlegroup then
       titleCell
           .css('border-left', '2px solid #fdfdfd')
           .css('width', '100%')
   end

   local titleColspan = 2
   if args.imageleft then titleColspan = titleColspan + 1 end
   if args.image then titleColspan = titleColspan + 1 end
   if args.titlegroup then titleColspan = titleColspan - 1 end

   titleCell
       .cssText(args.basestyle)
       .cssText(args.titlestyle)
       .addClass('navbox-title')
       .attr('colspan', titleColspan)

   renderNavBar(titleCell)

   titleCell
        .tag('div')
            .addClass(args.titleclass)
            .css('font-size', '110%')
            .wikitext(addNewline(args.title))

end

-- -- Above/Below rows --

local function getAboveBelowColspan()

   local ret = 2
   if args.imageleft then ret = ret + 1 end
   if args.image then ret = ret + 1 end
   return ret

end

local function renderAboveRow(tbl)

   if not args.above then return end

   addTableRow(tbl)
       .tag('td')
           .addClass('navbox-abovebelow')
           .addClass(args.aboveclass)
           .cssText(args.basestyle)
           .cssText(args.abovestyle)
           .attr('colspan', getAboveBelowColspan())
           .tag('div')
               .wikitext(addNewline(args.above))

end

local function renderBelowRow(tbl)

   if not args.below then return end

   addTableRow(tbl)
       .tag('td')
           .addClass('navbox-abovebelow')
           .addClass(args.belowclass)
           .cssText(args.basestyle)
           .cssText(args.belowstyle)
           .attr('colspan', getAboveBelowColspan())
           .tag('div')
               .wikitext(addNewline(args.below))

end

-- -- List rows -- local function renderListRow(tbl, listnum)

   local row = addTableRow(tbl)

   if listnum == 1 and args.imageleft then
       row
           .tag('td')
               .addClass('navbox-image')
               .addClass(args.imageclass)
               .css('width', '0%')
               .css('padding', '0px 2px 0px 0px')
               .cssText(args.imageleftstyle)
               .attr('rowspan', 2 * #listnums - 1)
               .tag('div')
                   .wikitext(addNewline(args.imageleft))
   end

   if args['group' .. listnum] then
       local groupCell = row.tag('th')

       groupCell
              .attr('scope', 'row')
              .addClass('navbox-group')
              .addClass(args.groupclass)
              .cssText(args.basestyle)

       if args.groupwidth then
           groupCell.css('width', args.groupwidth)
       end

       groupCell
           .cssText(args.groupstyle)
           .cssText(args['group' .. listnum .. 'style'])
           .wikitext(args['group' .. listnum])
   end

   local listCell = row.tag('td')

   if args['group' .. listnum] then
       listCell
           .css('text-align', 'left')
           .css('border-left-width', '2px')
           .css('border-left-style', 'solid')
   else
       listCell.attr('colspan', 2)
   end

   if not args.groupwidth then 
       listCell.css('width', '100%')
   end

   local isOdd = (listnum % 2) == 1
   local rowstyle = args.evenstyle
   if isOdd then rowstyle = args.oddstyle end

   local evenOdd
   if args.evenodd == 'swap' then
       if isOdd then evenOdd = 'even' else evenOdd = 'odd' end
   else
       if isOdd then evenOdd = args.evenodd or 'odd' else evenOdd = args.evenodd or 'even' end
   end

   listCell
       .css('padding', '0px')
       .cssText(args.liststyle)
       .cssText(rowstyle)
       .cssText(args['list' .. listnum .. 'style'])
       .addClass('navbox-list')
       .addClass('navbox-' .. evenOdd)
       .addClass(args.listclass)
       .tag('div')
           .css('padding', (listnum == 1 and args.list1padding) or args.listpadding or '0em 0.25em')
           .wikitext(addNewline(args['list' .. listnum]))

   if listnum == 1 and args.image then
       row
           .tag('td')
               .addClass('navbox-image')
               .addClass(args.imageclass)
               .css('width', '0%')
               .css('padding', '0px 0px 0px 2px')
               .cssText(args.imagestyle)
               .attr('rowspan', 2 * #listnums - 1)
               .tag('div')
                   .wikitext(addNewline(args.image))
   end

end


-- -- Tracking categories --

local function needsHorizontalLists()

   if border == 'child' or border == 'subgroup'  or args.tracking == 'no' then return false end

   local listClasses = {'plainlist', 'hlist', 'hlist hnum', 'hlist hwrap', 'hlist vcard', 'vcard hlist', 'hlist vevent'}
   for i, cls in ipairs(listClasses) do
       if args.listclass == cls or args.bodyclass == cls then
           return false
       end
   end

   return true

end

local function hasBackgroundColors()

   return mw.ustring.match(args.titlestyle or ,'background') or mw.ustring.match(args.groupstyle or ,'background') or mw.ustring.match(args.basestyle or ,'background')

end

local function getTrackingCategories()

   local cats = {}
   if needsHorizontalLists() then table.insert(cats, 'Navigational boxes without horizontal lists') end
   if hasBackgroundColors() then table.insert(cats, 'Navboxes using background colours') end
   return cats

end

local function renderTrackingCategories(builder)

   local title = mw.title.getCurrentTitle()
   if title.namespace ~= 10 then return end -- not in template space
   local subpage = title.subpageText
   if subpage == 'doc' or subpage == 'sandbox' or subpage == 'testcases' then return end

   for i, cat in ipairs(getTrackingCategories()) do
       builder.wikitext() 
   end

end

-- -- Main navbox tables -- local function renderMainTable()

   local tbl = HtmlBuilder.create('table')
       .attr('cellspacing', 0)
       .addClass('nowraplinks')
       .addClass(args.bodyclass)

   if args.title and (args.state ~= 'plain' and args.state ~= 'off') then
       tbl
           .addClass('collapsible')
           .addClass(args.state or 'autocollapse')
   end

   tbl.css('border-spacing', 0)
   if border == 'subgroup' or border == 'child' or border == 'none' then
       tbl
           .addClass('navbox-subgroup')
           .cssText(args.bodystyle)
           .cssText(args.style)
   else -- regular navobx - bodystyle and style will be applied to the wrapper table
       tbl
           .addClass('navbox-inner')
           .css('background', 'transparent')
           .css('color', 'inherit')
   end
   tbl.cssText(args.innerstyle)

   renderTitleRow(tbl)
   renderAboveRow(tbl)
   for i, listnum in ipairs(listnums) do
       renderListRow(tbl, listnum) 
   end
   renderBelowRow(tbl)

   return tbl

end

function p._navbox(navboxArgs)

   args = navboxArgs

   for k, v in pairs(args) do
       local listnum = ( .. k):match('^list(%d+)$')
       if listnum then table.insert(listnums, tonumber(listnum)) end
   end
   table.sort(listnums)

   border = trim(args.border or args[1] or )

   -- render the main body of the navbox
   local tbl = renderMainTable()

   -- render the appropriate wrapper around the navbox, depending on the border param
   local res = HtmlBuilder.create()
   if border == 'none' then
       res.node(tbl)
   elseif border == 'subgroup' or border == 'child' then
       -- We assume that this navbox is being rendered in a list cell of a parent navbox, and is
       -- therefore inside a div with padding:0em 0.25em. We start with a </div> to avoid the
-- padding being applied, and at the end add a
to balance out the parent's
       res
           .tag('/div', {unclosed = true})
               .done()
           .node(tbl)
           .tag('div', {unclosed = true})
   else
       res
           .tag('table')
               .attr('cellspacing', 0)
               .addClass('navbox')
               .css('border-spacing', 0)
               .cssText(args.bodystyle)
               .cssText(args.style)
               .tag('tr')
                   .tag('td')
                       .css('padding', '2px')
                       .node(tbl)
   end

   renderTrackingCategories(res)

   return tostring(res)

end

function p.navbox(frame)

   if not getArgs then
   	getArgs = require('Module:Arguments').getArgs
   end
   args = getArgs(frame)

   -- Read the arguments in the order they'll be output in, to make references number in the right order.
   local _
   _ = args.title
   _ = args.above
   for i = 1, 20 do
       _ = args["group" .. tostring(i)]
       _ = args["list" .. tostring(i)]
   end    
   _ = args.below

   return p._navbox(args)

end

return p

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.